The ease of high rise repair and lintel replacement
If you asked around, you would find very few people who know what a lintel is. You are more likely to get an answer associated with cooking than you would one with high rise repair. For the building owner, lintel replacement is a vital part of building maintenance and restoration of old buildings. In a brick house, there it is a piece of metal surrounding the doors and window. Those are lintels. And as a building ages and inevitably settles, the building owner is going to have to contract was someone for lintel replacement. The case of a high rise repair job, this can get rather tricky. It may look like the bricks are resting on a door or window frame, but actually it's the lintel that is completing the seal and are an important element in any brick building.
A lintel is a shelf that the bricks can rest on. The problem is that these things are exposed to the changes in weather like the rest of the brick wall. In a lot of buildings, you may never see the lintel because it is covered with mortar. And the case of a high rise repair job, it may be so high up, that you will never see it. However, if it ages or corrodes, it can bring cracks to the entire wall. A crack in a brick wall can start small but then it can grow as a wall settles and changes over the years. This is why lintel replacement is a common occurrence.
A broken or corroded lintel is a way that water can get into a wall and then as it freezes and expands through the seasons, it will put pressure on the wall from the inside. And the higher the wall, the more likely you are going to need high rise repair. There can be greater temperature variations in tall buildings that do not exist in single story buildings. Although, being an one story dwelling does not prevent you from having to have lintel replacement. For the layman, this is a very difficult job and you should do yourself a favor and find a way to make it easy.
You will need skilled craftsmen and experienced masons to finish this work and make sure you have an easy time. You need to look for company that specializes in both high rise repair and lintel replacement. This way, you will get the best of both worlds even if you are dealing with a single story building. High rises, by their very nature, have a lot of unexpected problems arise with any repair job. If you contact a company like Bruno construction, they will assess what needs to be done and know all the infrastructure requirements before they ever begin work. They will start by looking at what needs to be repaired in order to maintain the safety of the building. Then they will be happy to talk to you about aesthetic concerns and the kind of look you want your building to portray. They are masters both the technical needs of masonry and the appearance of your brick wall. They are knowledgeable about all the legal and regulatory requirements necessary to work on high rise repairs. Their customer service is very good and you will be pleased if you need anything from a complete restoration of a wall or something that is relatively simple as lintel replacement.
Brick masonry work is improved by tuckpointing
One of the reasons why Tuckpointing is used is because it gives a building the look that the masonry has been put together with fine joints. This architectural element improves the overall look of brick masonry. It is a technique that traces its origins back to the days when uneven bricks were the most common brick available. The technique is very simple. Before the brick masonry sets, the mason will place either clay, mortar, or putty inside the joint. It is then smoothed over to make an even line. It would be a mistake to think that tuckpointing is only done on a new wall. Older walls that are beginning to show their age benefit greatly by tuckpointing. The added advantage of this is that this increases the safety of the wall as well as highlighting the brick masonry.
In case you are wondering, this procedure is called tuckpointing because the mortar or clay is tucked between the bricks. And it is usually done with the point of a trowel. And while it is a perfect accent for the facade of a brick building, there is a very important reason that all building should have this done. As brick masonry ages, it can develop cracks which will eventually grow so that it will become harmful to the wall. It becomes a space where water can enter the small cracks and then by melting and freezing, it will expand and contract until the entire brick masonry wall is damaged. It can go on for so long that a simple job of tuckpointing will not fix the problem. Generally speaking, the old mortar will be cut to a depth of about 3/4 inch and scraped off. Then the space will be filled with new mortar and tucked under the bricks.
All this will be needed because of the aforementioned weather damage, or simply because of the age of the building. Sometimes it means that the building has had time to settle and the pressure of the walls can lead to the cracks. Even with the uniform nature of modern bricks, brick masonry has small variations in the weight and that force will cause changes in the mortar. Tuckpointing is a great way to deal with these problems, and head them off before they become so serious that they damage the integrity of the structure. If you contact the Bruno construction company, you will find professionals who understand how a brick wall is put together and how to use this material to repair your building.
The look of a brick depends on what it is made of. The experts at Bruno construction understand which brick will give you the finish that you need, or be able to match the facade you already have. It is one thing you can expect when you deal with experienced personnel like the ones at this company. Their many years of experience with the entire construction process will remove many of the headaches that are associated with this kind of work, and will give you and your building exactly what you need.